Geodynamic constraints on orebody localization in the Anqing orefield, China: Computational modeling and facilitating predictive exploration of deep deposits   总被引：1，自引：0，他引：1  

Liangming Liu  Changlin Wan  Chongbin Zhao  Yilai Zhao 《Ore Geology Reviews》2011,43(1):249-263

The Anqing Fe–Cu skarn deposit, with an age of 134 to 142 Ma and resources of 62.4 Mt at 0.906% Cu and 32.2% Fe, is one of the most important deposits in the Yangtze River Metallogenic Belt, East China. To better understand the localization of orebodies and thus facilitate predictive exploration of deep orebodies, computational modeling is used to simulate the coupled geodynamic processes during the syn-tectonic cooling of the ore-related intrusion, based on geological and geophysical investigations in the Anqing orefield.The occurrences of the ore veins and veinlets in diorite and skarn, as well as the sharp zigzag boundary of the orebody, indicate that the Cu ores were deposited after the solidification of the diorite and skarn formation, and were located in some tensional structural spaces that are unevenly distributed along the contact zone between the felsic intrusion and sedimentary carbonates. The locations of orebodies are closely associated with the contact zone shape. The computational results of two models with two typical contact-shapes show that pore fluid flow was focused into the dilation zones from different sources. All the significant dilation zones, in which the existing orebodies were located, are distributed in some specific places of the south contact zone of the intrusion. In addition, these dilation zones are closely related to the contact zone shape of the intrusion and can control the location of orebodies through the coupled mechano-thermo-hydrological processes during cooling of the intrusion in the extension setting. The skarns are not critical for controlling the localization of orebodies. This means that exploration for deep ore should target deep dilation zones close to the contact boundary of the intrusion. Such recognition may provide a useful guide in selecting exploration targets in the Anqing orefield. As a direct result of computational modeling, an orebody has been discovered in the deep dilation zone in this orefield. It demonstrates that computational modeling is a promising tool for understanding the metallogenic processes and for facilitating the deep exploration of hidden orebodies that are related to intrusions.  相似文献   

Numerical modeling of cyclic mobility based on fuzzy-set concepts in plasticity theory     

Yu Bao  Stein Sture 《Computers and Geotechnics》2011

In this paper, the application of an efficient, transparent and accurate kinematic-cyclic constitutive model based on the fuzzy-set concepts and incremental plasticity theory is presented to show its capability in modeling cyclic mobility of saturated granular soil. The nature and kinematic mechanism of the membership functions in the fuzzy-set constitutive model are illustrated. The model’s capability of modeling soil dilatancy is investigated. Important features of volume change and pore water pressure build-up related to soil cyclic mobility are captured. The formulation of the proposed model is relatively simple and it can be readily implemented in finite element codes. The enhanced fuzzy-set model is capable of simulating ground motion problems particularly related to cyclic mobility, soil liquefaction, and spreading behavior.  相似文献   

ATLAS III in situ heating test in boom clay: Field data,observation and interpretation   总被引：1，自引：0，他引：1  

G.J. Chen  X. Sillen  J. Verstricht  X.L. Li 《Computers and Geotechnics》2011

The ATLAS III small scale in situ heating test aimed at assessing the thermo-hydro-mechanical (THM) effects on the Boom clay of the significant temperature gradients generated in this host rock as a consequence of the geological disposal of radioactive, heat-emitting wastes. This paper presents data on temperature, pore water pressure and total stress measured during the experiment and highlights several interesting observations regarding the thermal anisotropy and THM coupling in the Boom clay. The test has a simple geometry and well defined boundary conditions, which facilitates the comparison between measurement and numerical modeling studies. These studies included three dimensional coupled THM modeling of the test. The good agreement between measurement and numerical modeling of temperature and pore water pressure yields a set of THM parameters and confirms the thermo-mechanical anisotropy of the Boom clay.  相似文献   

Numerical predictions of the behaviour of soft clay with two anisotropic elastoplastic models     

Paulo J. Venda Oliveira  Luís J.L. Lemos 《Computers and Geotechnics》2011

The numerical predictions obtained with the Melanie and MIT-E3 models are compared. Firstly, the performance of the constitutive models is checked against undrained triaxial tests. The models are then used to replicate the behaviour of an embankment built on soft clay. The numerical results are compared with the field data in terms of settlements, lateral displacements and excess pore pressures. Additionally, the numerical predictions are also analysed in terms of yield area, contours of vertical effective stresses, horizontal effective stresses and shear stresses and in terms of effective stress paths.  相似文献   

基于多元自适应回归样条的青藏高原温泉区域的冻土分布制图   总被引：4，自引：2，他引：2  

张秀敏  南卓铜  吴吉春  杜二计  王通  游艳辉 《冰川冻土》2011,33(5):1088-1097

以探地雷达、电磁测深、钻探等技术方法获得野外数据及数字高程（DEM）遥感数据为基础,通过聚类分析和相关性分析对高程、坡度、坡向等因素对多年冻土分布的影响进行了定量化研究.利用非线性的多元自适应回归样条（MARS）方法建立了基于高程、太阳辐射的多年冻土分布模型,通过自身的交叉验证及对比年平均地温模型和逻辑回归模型的总体分...  相似文献   

松辽盆地北部泉头组三、四段储层质量预测     

孟元林  焦金鹤  田伟志  解习农  吴河勇  王成  姜文亚  王又春  肖丽华 《沉积学报》2011,29(6):1023-1030

为了预测松辽盆地北部泉头组三、四段低渗透储层的质量,首先将碎屑岩的成岩作用细分为早成岩阶段A、早成岩阶段B期、中成岩阶段A1亚期、中成岩阶段A21、A2、中成岩阶段B期。统计结果表明,成岩作用对储层的物性和含油性具有明显的控制作用,处于中成岩阶段B期的任何沉积相的砂体均不能产出工业油气流,在中成岩阶段A22只有主河道砂...  相似文献   

雪粒径遥感反演研究进展     

郭忠明  王宁练 《冰川冻土》2011,33(3):539-545

介绍了雪粒径遥感反演的研究历史,阐述了球形或非球形假设下基于雪在可见光波段高反射,在红外区雪面反射率显著下降且对雪粒径变化敏感原理的遥感反演基础,其中包括诸如温度、波长、颗粒形状等,并总结了目前研究中所应用的模型和算法,指出其优点和不足之处.此外,为了得到反演粒径的准确性,讨论了诸如温度、波长、颗粒形状等因素对粒径反演...  相似文献   

基于土壤植被不同参数化方法的流域蒸散发模拟     

邵薇薇  徐翔宇  杨大文 《水文》2011,31(5):6-14

植被和土壤是水循环中的重要载体,模拟流域水循环时植被和土壤的参数化也显得尤为重要。通过对比流域蒸散发模拟中分布式模型和集总式概念模型的土壤植被参数化方法,计算了潘家口水库流域不同时间尺度上的流域蒸散发,分析了不同时间尺度下流域蒸散发的影响因素。通过分析得出:(1)分布式水文模型中的植被参数化方法包括对植被时空分布与变化的描述,以及与之相关的土壤-植被-大气中水分和能量的传输过程的描述。(2)从GBHM模型与流域水热耦合平衡模型的对比分析可知,在流域尺度上,年实际蒸散发与潜在蒸散发之间呈互补的高度非线性关系;但在山坡和小时时间尺度上,实际蒸散发与潜在蒸散发之间呈正比关系,并可近似为线性正比关系。(3)基于流域水热耦合平衡模型在不同时间尺度的参数化分析可知,考虑植被土壤水分和植被覆盖度能改善对流域蒸散发的年际和季节变化的模拟精度;土壤水分和植被的影响随着时间尺度变小表现得越来越显著。  相似文献   

塔河油气田AT1区块凝析气藏三维地质建模研究     

刘蕊  盛海波  蔡玥  张庭娇  付国民 《西安地质学院学报》2011,(2):168-171

以随机函数理论为基础,采用相控-多参数协同的随机建模方法,建立塔河油气田AT1区块凝析气藏三维地质模型,实现气藏精细三维表征。首先,以钻井和岩芯资料为基础构建储层构造模型;然后,以小层界面为控制条件建立储层结构模型;接着,在沉积相、地质条件的约束下,采用序贯指示模拟法来建立砂体骨架模型;随后,在砂体骨架模型内进行优势相计算,形成最终有效砂体骨架模型;最后,以有效砂体骨架模型为约束,采用序贯高斯模拟法建立储层物性参数模型。结果表明：将物性参数变量与微相分布结合的序贯高斯模拟法建立孔隙度等物性参数的分布模型,以及采用地质分析类比、地质统计分析等方法优选最佳模型是有效的地质建模方法;所建地质模型精确细致地表征了塔河油气田AT1区块凝析气藏构造格架及储层、流体三维分布,反映了辫状水道复合连片,东北向展布,储层物性受相控较明显,非均质性较强。  相似文献   

地面加密自动站资料同化和数值模拟   总被引：7，自引：5，他引：2  

程磊  沈桐立  徐海明  刘聪 《气象科学》2011,31(1):24-32

采用美国多部门研制的WRF模式及其四维变分同化系统,对2008年5月长江中下游地区一次强对流暴雨天气过程进行了数值模拟试验;并分别将质量控制前和质量控制后的华东地区地面加密自动站资料加入模式进行四维变分同化试验,与实况进行了对比。结果表明:模拟试验能较好的模拟此次降水过程;而采用四维变分同化经质量控制后的地面加密资料,模式效果最好,使降水预报在降水落区和降水量上都获得较为明显的改善;但质量控制前四维同化改善效果不明显。这说明地面资料的质量控制很重要,它能去伪存真。有效地利用地面加密自动站资料,能使资料的加入与模式更协调,从而得到了最佳的模拟效果。  相似文献